Jackets fabric somewhat similar type fabric, with waterproof breathable performance, generally used for Professional Mountain hooded down jacket. But the difference is that the whole fabric is thinner and lighter than the Jackets soften the fabric. Moreover, because the general down jacket in cold environments, mainly for the solid water ice and snow melt water based, so the requirements of fabric water resistance is not as high as the Jackets, but in most cases, waterproof fabric made of down jacket The adhesive is not. Another point to note is that some low down jacket used to prevent leakage of gas-tight velvet coated fabric, if only for everyday wear, can barely be considered.
Thin fabric, soft fabric inside the extent of the highest of all down jacket, but also has wind, water repellent, breathable performance. Such material is down jacket and sleeping bag down the most widely used method of fabric, but the level of post-treatment process for fabric down proof of significant influence. Representative material: pertex, soft-b and so on.
Generally use a lower density of nylon or polyester; in the production of down jackets, when added in the anti-velvet fabric in the side, you can play the role of anti-velvet, anti-Cashmere good. The disadvantage is, anti-velvet softness of a down jacket, and the weight is added since Zhengyi. The most important thing is if you are using the words of poor anti-flannel, down jacket would greatly reduce the permeability, and, after washing, anti-flannel prone to breakage or agglomeration. Another way is for anti-cashmere processing, the process is in the brush on the inner layer a layer of fabric down proof plastic, fabric feel bad, and airtight. Representative material: Many, but not a well-known fabric manufacturer.
Commentaires